Vehicle marking according to DIN30711 and signs

According to Article 35 of the German Road Traffic Regulations, vehicles which are used for road construction and maintenance and enjoy special rights must be equipped with retroreflective red/white warning markings compliant with DIN 30710. Our practical application packages significantly increase your vehicle’s noticeability and make a contribution to safety. The markings can be attached at lightning speed: Clean and degrease the surface, cut strips to size, define the guide points with masking tape, remove protective foil and press on the warning marking along the guide points using a rubber roller. Finished! When bonding, the surface temperature must be between +18°C and +35°C. We use quality foil compliant with DIN 30710, fully retroreflective, weatherproof and resistant to washing.
 
Vehicle markings compliant with DIN 30710, by meter

Vehicle markings compliant with DIN 30710, by meter

Red and white retro-reflective quality film with a width of 141 mm in rolls or strips goods.

Vehicle markings compliant with DIN 30710 finished sets

Vehicle markings compliant with DIN 30710 finished sets

With these optimized for the most common types of vehicle marking sets you achieve optimal results even as a layman.

Vehicle markings compliant with DIN 30710, magnetic

Vehicle markings compliant with DIN 30710, magnetic

Suitable for all level or slightly curved surfaces. The product is supplied as a practical set with one right-pointing and one left-pointing strip in a length of 0.5 or 1.0 metre.

Vehicle signs "Vermessung" + "Baustellenfahrzeug"

Vehicle signs "Vermessung" + "Baustellenfahrzeug"

Practical magnetic or suction signs (for the inside rear window) in a handy size, which you can attach to any vehicle in seconds.

Page:  1 
Show 1 to 4 (from a total of 4 products)