Control- and Adjusting Station for Prism and Antenna Poles
For prism poles + antenna poles
The accuracy of your measurement depends in many cases on the circular bubbles of your prism poles and levels. If the circular bubbles are out of adjustment, there is a high risk for significant errors in your measurements. If you don't have our adjusting station, the necessary check-ups of your circular bubbles through qualified professionals and expensive tools can be very time-consuming and expensive.
The accuracy of your measurement depends in many cases on the circular bubbles of your prism poles and levels. If the circular bubbles are out of adjustment, there is a high risk for significant errors in your measurements. If you don't have our adjusting station, the necessary check-ups of your circular bubbles through qualified professionals and expensive tools can be very time-consuming and expensive.
Our Adjusting Station solves this problem by offering a quick, easy, yet accurate way of checking and readjusting your circular bubbles of all:
- Prism- and antenna poles of all manufactures with a diameter of 25 mm to 43 mm
- Level
- Staves
The GOECKE adjusting station offers substantial advantages in comparison to a check-up with the theodolite and should be part of every surveying office.
Advantages:
- Fast and accurate check up within seconds
- Adjusting of circular bubbles with our special tool (included) within 2 minutes
- No need for qualified professionals for check ups and readjustments
- One-time set-up of the station takes 5 - 10 minutes
After the really simple assembly on a wall (all you need is an 80 cm or longer construction level or theodolite, a 10-mm open end wrench, a screwdriver, and a hammer drill with a 6-mm masonry bit) and the one time set-up of the station, the poles can be checked in a minimum amount of time.
Page: 1
Show 1 to 1 (from a total of 1 products)
