Track measuring rod for track axis

For measuring the track axis. Pivoting prism holder with integrated circular level. One side is made of plastic to prevent short circuits. Stop for precise positioning on the inside of the rail, the stop point is exactly at the reference height (14 mm below the top edge of the rail). When using a LEICA GPH1 prism or LEICA-compatible prism in combination with the 103-GML-AW adapter, the measuring point is 160 mm vertically above the track axis / or SOK.

When using the prism with tilting holder and 10 mm plug-in spigot from the 103-GMP30/34/35 assembly (square shape), the measuring point is 100 mm vertically above the track axis or SOK.

The track measuring rod is supplied with a 10 mm socket as standard. It can be used with LEICA prisms or prisms with a 5/8" internal thread using the appropriate adapters. Supplied without prism for the standard track gauge of 1,435 mm.

Optionally available special accessories or special models (combined):

Superelevation measuring devices
Additional prism holders over the respective inner edge of the rail
Version for grooved rails
Versions for track gauge 1,000 mm

Article-No.	product description	track gauge	PU	W	EUR/piece
103-GML-10	Track bar for gauge 1,435 mm, with a 10-mm socket (center)	1435 mm	1	N	400,00*
103-GML-10-ZPBG	Track measuring rod for track gauge 1,435 mm, with 10 mm sockets, one fixed (stop side) and one movable prism mount (opposite side)	1435 mm	1	N	1.015,00*
103-GML-AW	Adapter with 12 mm-LEICA snap in pin for 103-GML-10		1	N	18,55*
103-GML-A58	Adapter with 5/8 “external thread for 103-GML-10		1	N	23,00*