Standard Label

Distinctive mark - secure connection!
With the plastic surveying marks invented by GOECKE you have a maximum flexibility if it comes to mark one marking pipe with a highly visible top plate.
The connection between the tube and the cap is plugged by a specially shaped expanding wedge. Without a special tool the two parts can no longer be separated. Caps made of plastic or aluminum without an expanding wedges are hardly usable  in our view because the pipes have too large tolerances in the inner diameter. A reliable anchorage between the pipe and cap can therefore not be guaranteed.


Expanding wedges are always included.
Benefits at a glance:
  • Excellent impact and abrasion resistance
  • Use of high-quality polyamide (firstt granules, no recycled material)
  • Secure connection of pipe and cap by wedge
  • Without special tools are not separable
 
PA survey head plates for pipe 17, Head-Ø=60 mm

PA survey head plates for pipe 17, Head-Ø=60 mm

We use high-quality friction resistant PA for the production of our survey head plates.

PA survey head plates for pipe 17, Head-Ø =90 mm

PA survey head plates for pipe 17, Head-Ø =90 mm

We use high-quality friction resistant PA for the production of our survey head plates.

PA survey head plates for pipe 17, head= 100x100 mm

PA survey head plates for pipe 17, head= 100x100 mm

We use high-quality friction resistant PA for the production of our survey head plates.

PA survey head plates for pipe 18, head-Ø = 60 mm

PA survey head plates for pipe 18, head-Ø = 60 mm

We use high-quality friction resistant PA for the production of our survey head plates.

Page:  1 
Show 1 to 4 (from a total of 4 products)


Back