Monitoring with magnetic beads

Precise - universal - inexpensive
Our ball prism monitoring system is modular. The actual prism consists of a very precisely manufactured ball made ​​of galvanized steel with a precisely built in the middle of a triple prism.
Completing the prism tuned by various bases and ball on the mounting situation centering plates that can easily stick reliably to almost any surface and can be screwed or dowels.
A strong base in the ball permanent magnet is integrated, which ensures reliable connection to the ball and to the centering prism.

 The smart design allows pivoting the prism over a range of 200 grads in all directions.
The centering for repeat measurements (after pivoting or replacing of the prisms) is in the range of a few tenths of a millimeter.
These are the points to be observed easily accessible and the measurement intervals long, it may be economical to install the prisms just before the measurement. They can be used in the rest of the time on other projects.
In this case, the only remaining base ball and the centering on the monitored object. In this way, theft and vandalism risk and cost of the required prisms fall significantly.
Note:
The ball prism system is recommended only to be monitored components on which there are no strong vibrations. The use of rail tracks or strongly vibrating machinery, etc., is not recommended.
Here would be - in conjunction with the centering plates, although
the position of the prism to ensure reliable, the vibrations may lead to a rotation of the prism on the centering plate, or in the base.

Monitoring Ball Prisms Ø 30mm and Ø 1.5“ (38.1mm)

Monitoring Ball Prisms Ø 30mm and Ø 1.5“ (38.1mm)

Glass mini prisms manufactured with a high level of precision and mounted in a ball housing made of galvanised steel.

Protective cap for ball prisms

Protective cap for ball prisms

A protective cap can be clipped onto the ball prisms...

Ball base Ø 33mm with permanet magnet

Ball base Ø 33mm with permanet magnet

This ball base made of hard anodised aluminium features an integrated permanent magnet and is suitable for very fast and reliable mounting on all magnetic surfaces.

Detaching tool for ball bases with power magnets

Detaching tool for ball bases with power magnets

It is rarely possible to detach ball bases with magnetic forces of 15 and 20kg from their installation surface without using a tool.

Ball base with permanent magnet + thread connection

Ball base with permanent magnet + thread connection

When you want to use ball prisms with M8 wall plugs, prism rods or similar devices, our ball bases (Ø 33mm) with thread connection are the right choice.

Centring plates for ball bases with Ø 33mm

Centring plates for ball bases with Ø 33mm

When the magnetic ball base is not intended for permanent mounting on the object or when the installation surface is not magnetic, we recommend the use of our galvanised steel centring plates.

Cover plate for centring plates with Ø 33mm

Cover plate for centring plates with Ø 33mm

Used to protect the aforementioned centring plates from dust and the elements.

Transport case for ball prisms and bases

Transport case for ball prisms and bases

For the transport of your ball prisms we recommend our special cases made of shockproof
ABS plastic with foam insert.

Page:  1 
Show 1 to 8 (from a total of 8 products)